Most Popular Mouldings (Top 25) |
|
|
The prices shown below are for a typical configuration for a magazine and newspaper frame in both Value Frame (VF) and Changeable Frame (CF) configurations. The is for a typical 8" x 10 1/2" magazine and a 12" x 22" newspaper with standard Framing Grade Acrylic. Other sizes may be more or less. If you aren't familiar with both types take a look at my page on Changeable and Value Frames and my page on comparing Changeable and Value Frames In the sections below hover over the text area to expand additional information. |
|
|
|
|
#1. #203 Matte Black 1 3/16". (26%) This is my big Kahuna. A full 26% of all my sales in since 2001 have used this moulding. And there is a good reason why; it works well with just about any magazine, comic, comic art, newspaper or just about any other ephemera you may have. And it's inexpensive. Only some of 3/4" wide mouldings cost less. It gives you the most bang for the buck. This is one of 5 Matte Black flat top mouldings that range in width from 3/4" to 2 3/4" wide. If you like the width of this moulding but want to try something a little different, 9 and 12 in the top 25 list. These are Gloss Black and Opaque Black versions of this moulding. Or if a little color or wood finish is what you want then look at these mouldings which are all the same size:
|
|
|
|
|
|
#2. #207 Matte Black 1 1/2". (16%) My second biggest moulding seller is a slightly larger version of #203. It's 1 1/2" wide as opposed to 1 3/16" wide for #203. Aside from the width, it is identical to #203 and makes up 16% of all my sales since 2001. It gives newspaper frames a slightly better presentation. It goes good with all Value and Changeable Newspaper sized frames as well as Magazine size Changeable Frames. For Magazine Value Frames the width tends to overwhelm the magazine. If you want a Matte Black moulding with a flat top for a magazine VF, I would recommend #203, #660, #601 or #637 from the Top 25 List. It is one of 5 Matte Black flat top mouldings that range in width from 3/4" to 2 3/4" wide. If you like the width of this moulding but want to try something a little different, 9 and 12 in the top 25 list. These are Gloss Black and Opaque Black versions of this moulding. #760 is a Gloss Black version of #207 and is 1/8" wider. #838 is Opaque Black and is 1/4" wider and has a small inside notch.Or if a little color or wood finish is what you want then look at these mouldings which are all the same size: |
|
|
|
|
#3. #601 Matte Black 3/4". (13%) Moulding #601 is my most economical moulding. It is a smaller version of my Number 1 and 2 best sellers. Aside from the width, it is identical to #203 and #207 and makes up 16% of all my sales since 2001. It can be used for magazine and newspaper sized frames with some reservations. If considering #601, #203 and #207 for a magazine or newspaper frame, here is how I would recommend them.
It is one of 5 Matte Black flat top mouldings that range in width from 3/4" to 2 3/4" wide. If you like the width of this moulding but want to try something a little different, 9 and 12 in the top 25 list. These are Opaque Black, Mettalic Black and Gloss version of this moulding. #637 and #612 are identical except for the finish. #838 has an identical face except for the finish and has a deeper rabbit, 15/16" vs 5/8" for the others.
|
|
|
|
| My top 3 mouldings represent over 50% of all my sales since 2001. No other moulding has more than 5% of sales. | |
|
|
|
|
#4. #201 Matte Black 3/4". (5%) Moulding #201 is a nice change of pace from the flat top mouldings. It also comes in Walnut (#222) and Cherry (#231) Finishes. It also has a set of narrrower siblings (#801, #802 and #803). It can be used for magazine and newspaper sized frames with some reservations. If considering #201 or it's smaller black sibling (#803) here is what I would choose.
If you like the profile of this moulding, might want to consider the other two finishes for this profile. #222 and #231 are identical except for the finish.The following are similar except that they are 1 1/8" wide. |
|
|
|
|
#5. #803 Matte Black 3/4". (3.5%) Moulding #803 is a nice change of pace from the flat top mouldings. It is the smaller sibling of #201 which is #4 in the Top 25 List. #201 has been on my site since day 1, 10 years ago. #803 was just added in 2008 and will soon pass #201 for the #4 slot. It also comes in Walnut (#801) and Cherry (#802) Finishes. It also has a set of wider siblings (#201, #222 and #231). It can be used for magazine and newspaper sized frames with some reservations. If considering #803 or it's wider black sibling (#201) here is what I would choose.
If you like the profile of this moulding, might want to consider the other two finishes for this profile. #222 and #231 are identical except for the finish.The following are similar except that they are 1 1/8" wide. |
|
|
|
|
#6. #637 Opaque Black 3/4". (2.5%) Moulding #637 is one of my most economical moulding. It is identical to #3 on this list, #601 except that it has an Opaque Black finish instead of Matte Black. Opaque Black is a smoother, satin like finish that I prefer to Matte Black. It can be used for magazine and newspaper sized frames with some reservations. If considering #637, #203 and #207 for a magazine or newspaper frame, here is how I would recommend them.
These are also Matte Black, Mettalic Black and Gloss version of this moulding. #637 and #612 are identical except for the finish. #838 has an identical face except for the finish and has a deeper rabbit, 15/16" vs 5/8" for the others.
|
|
|
|
|
#7. #222 Walnut Finish 1 1/2". (2%) Moulding #222 is a nice change of pace from the flat top mouldings. It is also the first moulding in the Top 25 List that is not Black. It also comes in Matte Black (#201) and Cherry (#231) Finishes. It also has a set of narrrower siblings (#801, #802 and #803). It can be used for magazine and newspaper sized frames with some reservations. If considering #222 or it's smaller walnut finish sibling (#801) here is what I would choose.
If you like the profile of this moulding, might want to consider the other two finishes for this profile. #222 and #231 are identical except for the finish.The following are similar except that they are 1 1/8" wide. |
|
|
|
| The remaining mouldings in the lists each represents 2% or less of the total | |
|
|
|
|
#9. #761 Moire Gloss Black Laquer 1 3/16". Moulding #761 is a flat top moulding with a gloss finish. It is a little high maintenance as it will show fingerprints easily and is more scratchable the most other mouldings but can be cleaned with plastic or acrylic cleaner. Scratches can be removed with a plastic scratch remover like Novus #2. It can be used for all magazine and newspaper sized frames.
If you like the profile of this moulding, might want to consider the other finishes for this profile. |
|
|
|
|
#10. #691 Opaque Black 1 3/8". Moulding #691 is rounded top moulding with inner steps and an Opaque finish. It is one of my personal favorites and also comes in 7 other finishes. It can be used for all magazine and newspaper sized frames.
If you like the profile of this moulding, might want to consider the other finishes for this profile. |
|
|
|
|
#11. #692 Coffee Brown 1 3/8". Moulding #692 is rounded top moulding with inner steps and an nice Coffee Brown finish It is one of my personal favorites and also comes in 7 other finishes. It can be used for all magazine and newspaper sized frames.
If you like the profile of this moulding, might want to consider the other finishes for this profile. |
|
|
|
|
#12. #660 Opaque Black 1 3/16". This is the Opaque Black version of my most popular moulding, #203. It has a Satin-like finish instead of a Matte Black finish. It does cost a little more than it's Matte Black brother, but I prefer the Opaque Black. Or if a little color or wood finish is what you want then look at these mouldings which are all the same size:
|
|
|
|
|
|
#13. #231 Cherry Finish 1 1/2". (2%) Moulding #231 is a nice change of pace from the flat top mouldings. It is the Cherry version of #7 on this list. It also comes in Matte Black (#201) and Walnut (#222) Finishes. It also has a set of narrrower siblings (#801, #802 and #803). It can be used for magazine and newspaper sized frames with some reservations. If considering #231 or it's smaller Cherry finish sibling (#802) here is what I would choose.
If you like the profile of this moulding, might want to consider the other two finishes for this profile. #231 and #231 are identical except for the finish.The following are similar except that they are 1 1/8" wide. |
|
|
|
Coming Soon...............#'s 15-25
|
|
Shipping Zip Code Current Zip: None
Enter Shipping zip code

